Quick Answer: How Many Bags Of Concrete Do I Need Calculator?

How many square feet does an 80lb bag of concrete cover?

4 sq feet4 sq feet in that amount of cement..

How many bags of concrete does it take to fill a hole?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How many bags of concrete can you put in a mixer?

Beside this, how many bags of concrete can a mixer hold? Judging Amounts. Each 80-pound bag of ready-mix concrete requires about 6 pints of water, for a total weight per bag of 86.25 pounds. Five bags of ready-mix produces 3 cubic feet of wet mix that weighs approximately 431.25 pounds.

How much does it cost for 2 yards of concrete?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2018 was $120 per cubic yard, or $240 for the 2 cubic yards needed for a typical 10-by-10-foot patio.

How many 20kg bags of concrete do I need?

one 20kg bag will cover an area of 1.1m2 to a depth of approximately 10mm. or 108 x 20kg bags equates to one cubic metre of mixed concrete.

How much does a 50 lb bag of concrete cover?

One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about . 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60-pound bags of concrete, divide 33.333 cubic feet by . 45 cubic feet to get 74.07 total bags of concrete.

How many 20kg bags of premixed concrete do you need?

You will need 6 x 40kg bags per cubic meter. Keeping this in view, how many cubic Metres does a 20kg bag of concrete make? one 20kg bag will cover an area of 1.1m2 to a depth of approximately 10mm. or 108 x 20kg bags equates to one cubic metre of mixed concrete.

How much concrete does a 30kg bag make?

How much cement does a 30kg bag make? 30 cubic feet, 60 pounds of concrete mix yields .

How many bags of concrete do I need for a 4×4 slab?

Enter the size of the slab you want to build in square feet. The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab. (All yields are approximate and do not include allowance for uneven subgrade, waste, etc.)

How much area does a 25kg bag of cement cover?

As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.

How many bags of cement do I need for 1 cubic meter?

In general for M25 Grade concrete, which is extensively used for RCC work, cement content of one cubic meter concrete ranges from 300 kg to 350 kg. Each bag of cement weighs 50 kg and so 6 to 7 bags is required for M25 Grade concrete.

Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

How many 80lb bags of concrete do I need?

It will make a big difference. An 80# bag of pre-mixed cement, sand and gravel (CONCRETE) is 0.6 cubic foot per the bag. There are 27 cubic feet in a cubic yard. So 27 / 0.6 = 45 80# bags.

How many 25kg bags of ready mix concrete are in a cubic meter?

48 rounded bags of ready-mixed concrete of 40 kg each or a total of 1,920kg of ready-mixed concrete per cubic meter are required.

Is it cheaper to mix your own concrete?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. … Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

How thick should the concrete be for a driveway?

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Do you need rebar for 4 inch slab?

No, you do not need rebar for a 4-inch slab of concrete on grade. A 4-inch-thick slab cast on the ground and in permanent contact with it will float and rebar is not required. Rebar is recommended on concrete measuring 5 – 6 inches thick.

Is gravel needed under concrete?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

How many bags of quikrete do I need for a 10×10 slab?

017 cubic yards, and an 80-pound bag yields . 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that’s an extra 8 60-pound bags or 6 80-pound bags.

How many bags of concrete do I need for a 12×12 slab?

How many concrete bags would I need for a 12 ft x 12 ft x 6″ slab? 120 x 80lb Concrete bags. How much does it cost to pour a 12’x12′ x6″ slab? Ready-mix costs approx $412.69.

Is quikrete as good as concrete?

Quikrete Fast-Setting Concrete Mix is easy to use — just add water — and it sets in 20 to 40 minutes. It’s the most efficient option for setting posts for things like mailboxes, fences and lamps. … That’s stronger than the concrete used for foundations on most homes.