- What’s the best gear ratio for 35 inch tires?
- What are 4.10 gears good for?
- What are 4’11 gears good?
- Are 4.10 gears good for highway?
- Are 3.73 gears good for highway?
- Are 411 Gears good?
- What does a 4 11 gear ratio mean?
- Are 4.10 and 4.11 gears the same?
- Are 3.73 or 4.10 gears better?
- Is 3.42 or 3.73 better?
- Is 3.55 or 3.73 gears better?
- What gear ratio is best for speed?
What’s the best gear ratio for 35 inch tires?
Depending on the axle, the next lowest ratio from a 4.10:1 is most likely the 4.56:1, which should be selected for towing and performance.
Because of the extra weight associated with off-road tires, we usually recommend going with a performance-minded gear ratio for any tire size above 35 inches..
What are 4.10 gears good for?
A 4.10 axle ratio will provide improved acceleration in stop and go city traffic. A lower gear (higher numerical) ratio provides more low-speed wheel torque, which makes it easier to get the vehicle moving when pulling a trailer or carrying a heavy load.
What are 4’11 gears good?
The 4:11 Gears will get you faster acceleration higher rpm at any given speed and increased fuel consumption. The 3:73 Gears will give you decent acceleration, lower rpm at any given speed and improved fuel consumption.
Are 4.10 gears good for highway?
Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.
Are 3.73 gears good for highway?
Well, if you plan on doing a lot of freeway driving, you don’t want to choose a gear that’s too low for your car because you’ll be going down the freeway at too high of an RPM. … Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc.
Are 411 Gears good?
4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel. Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities.
What does a 4 11 gear ratio mean?
4.11 is a gear ratio.. basically it means that the the pinion or driveshaft will turn 4.11 times for each rotation of the tires. The higher the ratio, the more times the the the engine, transmission, transfer case, etc turns to make the wheels spin which yields less top speed but more low end torque (usually).
Are 4.10 and 4.11 gears the same?
Registered. It is just two different ways to come up with something that is basically the same. The only difference is the number of teeth on the ring and pinion gears. One company might use 41 on the ring and 10 on the pinion (4.10), while another might use 37 on the ring gear and 9 on the pinion (4.11).
Are 3.73 or 4.10 gears better?
Vice versa, if the gear ratio is lower it has worse acceleration but a higher top speed. So, by changing your gear ratio, no power levels are being changed, just the torque….WHICH GEAR RATIO IS FOR YOU?3.73 RATIO4.10 RATIOBetter gas mileageWorse gas mileageHigher top speedLower top speed2 more rows•May 12, 2020
Is 3.42 or 3.73 better?
The difference in towing mpg between the 3.42 and 3.73 gears at highway cruise speed, under the same conditions, should be less than 1 mpg because of the slightly higher rpm running 3.73s. Vehicle speed actually plays a bigger role in fuel economy than engine rpm.
Is 3.55 or 3.73 gears better?
3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.
What gear ratio is best for speed?
A gear with a lower numerical ratio, like 3.08:1, does not multiply torque as much, but with an equal rpm input will produce a higher axle or tire speed, all else being equal. This means that rear gear ratios are a compromise.